Act Ir2000ul Windows 7 Driver

20.01.2020

This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will nor occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Increase the separation between the equipment and receiver.Reorient or relocate the receiving antenna.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. This equipment is in the 2nd Class category (information equipment to be used in a residential area there to) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residential area. When used near a radio or TV receiver, it may become the cause of radio interference.

Act Ir2000ul Windows 7 Driver

Act Ir2000ul Windows 7 Driver

Read the instructions for correct handling.

Read User's Manual text version 921 Corporate Way, Fremont, CA 94539, USA Tel: +1-510-490-8024, Fax: +1-510-623-7268 Web: E-mail: ACT-IR2000UL IrReadyTM FIR USB Adapter User's Manual WARNING Please install driver BEFORE you plug in ACT-IR2000UL to your USB port if your system is Windows XP or under. But please Just Plug it first if your system is Vista or Windows 7. April 30, 2010 Version 1.6.2 © Copyright 2002-2010 ACTiSYS Corporation, The Infrared Wireless Expert ACT-IR2000UL User's Manual All Rights Reserved FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING-FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user authority to operate this equipment NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will nor occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Increase the separation between the equipment and receiver.Reorient or relocate the receiving antenna.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. This equipment is in the 2nd Class category (information equipment to be used in a residential area there to) and conforms to the standards set by the Voluntary Control Council For Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residential area. When used near a radio or TV receiver, it may become the cause of radio interference. Read the instructions for correct handling. NOTE: Must be used with shielded cable only. FOR YOU RECORDS For your assistance in reporting this product in case of loss or theft, please record below the model number and serial, which are located on the bottom of the case.

Please retain this information. Model Number Date of Purchase Serial Number Place of Purchase All logos, trademarks or model names are the properties of the respective organizations or companies. © Copyright 2002-2010 ACTiSYS Corp.

Page 2 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual TABLE OF CONTENTS REVISION HISTORY. 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 INTRODUCTION. 5 PACKAGING CHECK LIST. 5 SYSTEM REQUIREMENTS. 5 BIOS SETUP.

5 DRIVER INSTALLATION FOR WINDOWS XP (32 BIT). 6 DRIVER INSTALLATION FOR WINDOWS VISTA/ WINDOWS 7 (32 BIT). 10 DRIVER INSTALLATION FOR WINDOWS VISTA/ WINDOWS 7 (64 BIT). 11 NATIVE DRIVER REMOVAL PROCEDURE IN WINDOWS XP.

14 DRIVER REMOVAL FROM WINDOWS XP. 17 GUIDE TO MANUALLY UPDATE THE DRIVER IN WINDOWS XP/ VISTA / WINDOWS 7. 19 TROUBLE SHOOTING. 23 PRECAUTIONS.

24 WARRANTY INFORMATION. 25 CONTACT INFORMATION.

26 © Copyright 2002-2010 ACTiSYS Corp. Page 3 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual REVISION HISTORY Revision History Revision 1.5a 1.5b 1.6 1.6.1 1.6.2 Date 7/15/2003 Comment Released Added warning message on Driver installation before plugging 3/10/2004 USB dongle Overall reformatted; Added feature & Chapter for Vista OS. 7/06/2007 Extracted Technical Chapter. Updated Corporate address Updated copyright announcement 4/30/2010 Added Driver Installation for Windows Vista/Win7 and removed Windows 98/ME/2K © Copyright 2002-2010 ACTiSYS Corp.

Page 4 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 1 INTRODUCTION ACTiSYS ACT-IR2000UL is an advanced wireless Fast Infrared USB adapter designed to replace the serial port or FIR controller based FIR/SIR wireless peripheral through the PC USB port. Taking advantage of the true plug-and-play nature and high bandwidth of USB, ACT-IR2000UL offers the easiest conversion of existing wireless to the legacy-free personal computer platform with the following features: No external driver required in Vista and Win7 OS (both have Native driver for it), just plug & play. Fully compliant to USB specification 1.1 and IrDA® specification 1.1 Full-speed (12 Mbps) USB device operation Supports FIR (4Mbps) and all SIR speeds (9.6, 19.2, 38.4, 57.6 and 115.2 kbps).

Bus-powered device. Obtain power from USB port. No external power supply required. Low power consumption in standby mode (Standby current less than 0.5 mA). Not occupy PC's COM or Parallel port and has no complicated hardware port and resource setting and conflict, such as IO address / IRQ / DMA numbers. True PNP (Plug And Play) device.

Without re-installing USB driver when re-plugs in. Package size: 2.4'L x 1.4'W x 0.74'H, 65.0 g (2.4 oz). 2 PACKAGING CHECK LIST The package includes 1.

ACT-IR2000UL USB Dongle 2. Installation CD for Adapter Driver and User's manual. 3 SYSTEM REQUIREMENTS 1.

Windows 98SE/ME/2000/XP/Vista(32 & 64 bit)/Win7(32 & 64 bit). One unoccupied USB port.

4 BIOS SETUP Before you use this device, You HAVE TO enable your computer USB port in BIOS Settings. © Copyright 2002-2010 ACTiSYS Corp. Page 5 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 5 DRIVER INSTALLATION FOR WINDOWS XP (32 BIT) Important!: Do NOT use Windows Native Driver.

Instead, use the driver on the installation CD to assure a smooth installation. If you have plugged ACT-IR2000UL into USB port and mistakenly loaded Windows XP Native Driver, please refer to Chapter: 'NATIVE DRIVER REMOVAL PROCEDURE IN WINDOWS XP' to remove the driver first. Then follow the steps in below: 1. Insert the installation CD to PC Windows will copy user's manual to your C: Program Files actisys IR2000UL. Then it will autorun setup.exe. Please Click Next to continue.

The Installer will install ACTiSYS ACT-IR2000UL in the Destination Folder. To install to a different folder, click Browse and select one. To continue, click on Next. © Copyright 2002-2010 ACTiSYS Corp. Page 6 of 26 Apr. 1.6.2 The Infrared Wireless Expert 3.

1.6.2 The Infrared Wireless Expert 5. WinXP will detect ACT-IR2000UL Series. Select 'Install the software automatically (Recommended)'.

Please note you should take the CD out of the CD-ROM BEFORE clicking Next. ACT-IR2000UL User's Manual If you keep the CD in the CDROM, Windows XP will automatically search for all drivers compatible with ACT-IR2000UL. You will see a window with a choice of different drivers, please select the OEM one. If you install the driver to WindowsXP, the driver will automatically copy to Hard disk (C: Windows). Please highlight 'C: Windows inf oem0.inf' and click 'OK' button, Windows XP will automatically install ACT-IR2000UL.

WinXP will detect the updated drivers. Click Continue Anyway to continue. © Copyright 2002-2010 ACTiSYS Corp. Page 8 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 7. Click Finish to complete the installation. © Copyright 2002-2010 ACTiSYS Corp.

Page 9 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 6 DRIVER INSTALLATION FOR WINDOWS VISTA/ WINDOWS 7 (32 BIT) Windows Vista and Windows 7 32 bit have already had their updated Native Drivers for ACT-IR2000UL. So Only you need to do is just Plug & Play. (Note: However, in some cases you may have run the installation CD incidentally.

Then you can still select 'WinXP' driver for this OS because they are 100% Compatible. To know more details, please refer to chapter: 'GUIDE TO MANUALLY UPDATE THE DRIVER IN WINDOWS XP/ VISTA / WINDOWS 7') 1. Plug the dongle into the USB port.

It will automatically search for the driver. When it found, the system tray will pop up a message like (SigmaTel USB-IrDA Dongle #n) where n represents a number, 4 in this example, as follows. Please check Device Manager to confirm that the device has been installed successfully. © Copyright 2002-2010 ACTiSYS Corp. Page 10 of 26 Apr.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 7 DRIVER INSTALLATION FOR WINDOWS VISTA/ WINDOWS 7 (64 BIT) Instead of Plug And Play as described in chapter 6 for. Windows Vista (32 bit) and Windows 7 (32 bit), Now you need to install the driver yourself if using 64 bit OS of Vista and Win 7. Note: Preparation of the driver! Please Download this 64 bit driver from our website: beforehand. 1) Before installation, make sure that your PC is clean by removing any driver which you may have installed previously for ACT-IR2000UL. 2) Then plug the device and let Windows to find driver first from its internal driver database. Eventually, Windows will come up with a message: 'Device driver software was not successfully installed' like following screen: Figure 1-A: Device driver software was not successfully installed You can also verify this from Device Manager.

It will show 'IrDA/USB Bridge' with yellow color exclamation mark, see below. Figure 1-B: Device Manager Driver not installed properly 3) Right click this driver as shown in above figure 1-B and click 'Update Driver' from the popup window. © Copyright 2002-2010 ACTiSYS Corp.

Animation program free 3d. Here is a list of best Free Animation software 2D as well as 3D for beginners as well as pro users. The download links are also given for these tools. OpenToonz - Open-source Animation Production Software to Develop and Create ALL Together. This software can be used by anyone free of charge, no matter whether the purpose of use is commercial or not. This is available as an open source, so that users can modify its source code freely. We aim to develop a new. Jan 16, 2015. An animator can't do much without the right tools, namely powerful software. Here are a few free and open source alternatives for great animation software.

Page 11 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 4) Then the window of 'Update Driver Software IrDA/USB Bridge' will pop up, like below figure 2. Select second option ' Browse my computer for driver software' Figure2: Browse my computer for driver software. 5) Give the location of inf file for this 64 bit driver, which you have downloaded from our website, as below screen and click 'Next'. Figure 3: Browse location of driver file.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 6) Then you will get the message: 'Windows has successfully updated your driver software' like as below. Click 'Close' to complete this installation. Figure 4: Installation is completed 7) Finally, check Device Manager for new updated driver as shown in below figure.

Figure 5: Check Device Manager © Copyright 2002-2010 ACTiSYS Corp. Page 13 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 8 NATIVE DRIVER REMOVAL PROCEDURE IN WINDOWS XP The Installation CD provides the latest driver for Windows XP which you need. If instead, you had already installed the Native Driver in Windows XP, following steps show you how to remove the Native Driver so that you can follow the Installation Instruction to install the latest one.

Question: How do you know whether you have the Windows XP native driver? Answer: If your product name is 'SigmaTel USB-IrDA Dongle.' , then the answer is: 'Yes!' Figure 1 and 2 will tell you whether this is the case or not. Go to Control Panel, click System Icon then click 'Device Manager' © Copyright 2002-2010 ACTiSYS Corp. Page 14 of 26 Apr.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 2. You will see 'Infrared Devices' at the Device Manager.

Click it and it will show 'SigmaTel USB-IrDA Dongle' 3. Right click on 'SigmaTel USB-IrDA Dongle' Click Uninstall. You will see a 'Confirm Device Removal' Window then click OK. © Copyright 2002-2010 ACTiSYS Corp. Page 15 of 26 Apr.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 5. You have completed the removal of the Windows XP Native Driver.

Now you have successfully removed the Windows XP Native Driver! Before PC restarting, un-plug your ACT-IR2000UL dongle from USB port. Now refer to the chapter of 5. DRIVER INSTALLATION FOR WINDOWS XP (32 BIT) to re-install the latest driver. © Copyright 2002-2010 ACTiSYS Corp. Page 16 of 26 Apr.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 9 DRIVER REMOVAL FROM WINDOWS XP Important: Please keep the ACT-IR2000UL dongle plugging into the computer until prompted to remove it. Open the Control Panel and select Add / Remove Programs. Select ACTiSYS ACT-IR2000UL Series from the list. Click on the Add/Remove button to begin the uninstall process. © Copyright 2002-2010 ACTiSYS Corp. Page 17 of 26 Apr.

1.6.2 The Infrared Wireless Expert 3. To continue, click Yes button to uninstall the ACT-IR2000UL dongle. ACT-IR2000UL User's Manual 4. To complete the removal process, click the Finish button. Unplug the ACT-IR2000UL dongle from your USB jack.

© Copyright 2002-2010 ACTiSYS Corp. Page 18 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 10 GUIDE TO MANUALLY UPDATE THE DRIVER IN WINDOWS XP/ VISTA / WINDOWS 7 Sometimes the device may not work due to improper installation or driver conflict or some other reasons. If the driver does not get installed properly, Device Manager may get some yellow color exclamation sign (i.e. ) beside 'IrDA/USB Bridge'.

Then user needs to update the driver manually. To update driver manually, go to Device Manager, right click on already installed driver as shown in below figure 1 and then click Update Driver. Figure 1: Device Manager Driver not installed properly © Copyright 2002-2010 ACTiSYS Corp.

Page 19 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 2). Now, as shown in below figure 2 select second option ' Browse my computer for driver software'.

Figure 2: Browse my computer for driver software. Now give the location of the XP driver path.

This path depends on where you keep the inf and sys file for Windows XP (i.e from the ACT-IR2000UL CD or your local machine). After selecting new path, click Next.

Note: In case of Windows Vista/ Win7 64 bit, give the location of inf file for this 64 bit driver downloaded from our website, and click 'Next'. Figure 3: Browse location of driver file. © Copyright 2002-2010 ACTiSYS Corp. Page 20 of 26 Apr.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 4). You may get the following alert screenshot.

Select 'Install this driver software anyway'. Figure 4: Install this driver software anyway.

Page 21 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 6).

Finally, check Device Manager for new updated driver as shown in below figure. Figure 6: Check Device Manager for updated driver.

© Copyright 2002-2010 ACTiSYS Corp. Page 22 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 11 TROUBLE SHOOTING For help on general and miscellaneous problems you may be experiencing with your printing, refer to the following pages for possible solutions.

Look up your problem and try the solution. Symptom Can not establish link (General) Problem 1. The two IR devices are 1. Not aligned properly. Distance is too near or 2.

Device is inactivated 3. BIOS setting incorrect 5.

Installation is not correct. Solution Properly align them again Move one device to a proper distance. Enable the device by IR monitor.

Correct the BIOS Setting. Refer to un-installation guide to remove the device, then install again. Check to find out the source of interference and eliminate it before trying again. File Transfer between IR-equipped PDA and ACT-IR device-attached host computer stops before finishing up and an error message appears.

The infrared communication is interfered. For example, something blocks out the infrared beam or the burst of string light source, etc. The device work well Improper unplug and plug before.

But after I unplug it procedure then plug, it does not work again. In Device Manager I am Driver is not installed getting some yellow color correctly.

Exclamation sign (i.e. ' ') beside SigmaTel USB IrDA. Before you unplug it, you should disable the device. And enable the device after you plug it into your computer Please refer to Chapter: 'GUIDE TO MANUALLY UPDATE THE DRIVER IN XP/VISTA / WINDOWS 7' © Copyright 2002-2010 ACTiSYS Corp. Page 23 of 26 Apr. 1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 12 PRECAUTIONS To ensure trouble-free operation, please observe the following precautions: Optical communications are easily affected by external light sources, weak batteries, transfer distance, transfer angle, etc. Any of these conditions may cause a data transfer failure, incomplete, missing or incorrect data.

Make sure that the wireless interface is away from direct sunlight and other strong light source. Do not terminate arbitrarily during file transfer process between DUT and computers until finished. Otherwise DUT internal data integrity may be damaged, which is due to the violation of DUT's. Do not expose the unit to moisture, as this will damage the internal circuitry. Do not expose the unit to extreme temperatures. It should not be placed in direct sunlight or in a closed vehicle, neither should it be placed near heaters nor other heat sources.

Do not store the unit in a humid or dusty place. Use a soft, dry cloth to clean the unit. Do not use a wet cloth or any solvent.

Do not drop the unit or handle the unit carelessly. CAUTION: Never touch the pins of computer connection terminal. An Electro Static Discharge can damage the internal circuits.

If this device requires any servicing, use only an ACTiSYS service dealer, an ACTiSYS approved service facility, or an ACTiSYS repair service. When exchanging data with host computer, be sure the appropriate serial communication port is available and is not in conflict with other peripheral device or software. © Copyright 2002-2010 ACTiSYS Corp. Page 24 of 26 Apr.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 13 WARRANTY INFORMATION ACTiSYS Corporation warrants the first end-user purchaser, for a period of 1 year from the date of purchase, that this wireless interface (The Product) will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof at no charge to the purchaser for parts or for labor. This warranty does not apply to any appearance items of the Product, any consumable items such as paper, ink ribbon, or batteries supplied with the Product, or to any equipment or any hardware, software, firmware, or peripheral other than the Product. This warranty does not apply to any Product the exterior of which has been damaged or defected, which has been subjected to misuse, abnormal service or handling, or which has been altered or modified in design, construction or interfacing. Tampering with Label Voids Warranty. In order to enforce the rights under this limited warranty, the purchaser should mail, ship or carry the Product, together with proof of purchase, to ACTiSYS. The limited warranty described above is in addition to whatever implied warranties may be granted to purchasers by law.

To the extent permitted by applicable law, ALL IMPLIED WARRANTIES INCLUDE THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR USER ARE LIMITED TO A PERIOD OF 1 YEAR FROM THE DATE OF PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described above, nor to extend the duration of any warranties beyond the time period described above on behalf of ACTiSYS.

The warranties described above shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described above, shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall ACTiSYS Corporation be liable or in any way responsible, for any damages or defects in the Product which were caused by repair or attempted repairs performed by anyone other than ACTiSYS technician. Nor shall ACTiSYS Corporation be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. FOR YOU RECORDS For your assistance in reporting this product in case of loss or theft, please record below the model number and serial, which are located on the bottom of the case.

1.6.2 The Infrared Wireless Expert ACT-IR2000UL User's Manual 14 CONTACT INFORMATION ACTiSYS Corporation 921 Corporate Way, Fremont, CA 94539, USA TEL:+1-510-490-8024, FAX:+1-510-623-7268 E-Mail: Web: © Copyright 2002-2010 ACTiSYS Corp. Page 26 of 26 Apr.